Proudly Serving Southwestern KY, Middle TN, and Northern AL

How to Read a Basement Waterproofing Proposal

TLDR

Start with the written specifications and product list, then use the job drawing to see where the work will take place. In the example Frontier proposal, the product list shows 70 feet of WaterGuard drainage, and one drawing shows where it will be installed. The project summary also mentions a recommended sump pump, so check the written scope to confirm whether the pump is included. Before signing, review any work you’ll need to arrange and read the warranty for the system being installed.

Schedule FREE Inspection


How to Read a Basement Waterproofing Proposal

A basement waterproofing proposal puts the recommendations from your inspection in writing. It shows what the crew plans to install and gives you a way to check how that work relates to the water you’ve seen in your basement.

Some details are easier to understand when you read two sections together. A product list can tell you how many feet of drainage are included, for example, while the job drawing shows which walls that drain will run along.

Here’s how to read those sections using an example proposal from Frontier Foundation & Crawl Space Repair.

Open the sample waterproofing proposal (PDF)

Start With the Work Listed in the Proposal

“Most homeowners call in and want to know exactly what’s included in their contract,” said Janet W., a Frontier account manager.

Janet usually starts with the product details so she can explain what each item does. In the example proposal, the written specifications call for WaterGuard XL sub-floor drainage, and the product list shows 70 feet of WaterGuard. The specifications direct you to the job drawing for the installation location.

The Project Summary also records that a TripleSafe Complete sump pump system was recommended. The Product List shows WaterGuard as the only item. If your proposal calls out a recommendation separately like this, ask your design specialist to confirm whether it’s included in the quoted work. If the new drain will connect to an existing pump, ask where that connection will be made.

Use the Job Drawing to See Where the Work Will Take Place

“The drawing is really where everything comes together,” Janet said.

The example proposal has one job drawing in the Job Details section. Use it to see where the 70 feet of drainage will be installed. If you’ve seen water along the back wall and around the corner, find both spots on the drawing and look for where the drain starts and stops.

Janet also uses the drawing to explain how water will move through the system. Ask your design specialist to show you where the drain leads, where the sump pump will sit, and where the discharge line will release water outside. Seeing the route makes it easier to understand how the proposed work will handle the water you’ve noticed.

Review What You’ll Need to Arrange

“Sometimes homeowners assume that everything related to the project is included, like electrical work or additional repairs,” Janet said.

In the example agreement, a dedicated outlet for electrical equipment is at the homeowner’s expense unless the contract specifies otherwise. If your installation needs a new outlet, ask when it should be ready. If the crew needs access behind a finished wall, check who will remove the drywall and who will put it back.

The example Project Summary also states that private line insurance is excluded. If you have a buried sprinkler line or another private utility near the work area, point it out when you review the proposal and ask how it will be handled. Janet also gets questions about mobilization fees. If one appears on your proposal, ask what it covers and whether it’s included in the contract total.

Read the Warranty Alongside the Job Drawing

“Each product does have its own warranty depending on what’s being installed,” Janet said. She can point homeowners to the terms for their installation and explain what’s covered and for how long.

In the example, the WaterGuard warranty applies along the sections where the drain is installed. It addresses water from the joint where the wall meets the floor that passes through the installed system and onto the basement floor. The drawing helps you see which parts of the basement that language applies to.

If you’ve also seen water come up through a crack in the middle of the floor, bring up that location during the review. The example warranty addresses floor cracks separately and specifies that a lateral drain line must be installed for that coverage.

Compare the Work Behind Each Quote

“I always recommend comparing the actual scope of work, not just the price,” Janet said.

Start with the area each contractor plans to address. One quote might include drainage along the back wall and a connection to your existing pump. Another might extend the drain around the corner and include a new pump with battery backup. Those details help explain what you’re paying for and give you a basis for comparing the warranties.

If you’re reviewing a Frontier proposal, bring any photos you’ve taken after a rain and pull up the job drawing with your design specialist. We can walk through the proposed work from where the water enters to where it will discharge.

Schedule FREE Inspection

Frequently Asked Questions

Where do I find the deposit and payment details?

Look at the Project Summary. The example lists the total contract price, the required deposit, the amount already paid, and the amount due upon installation. If your deposit hasn’t been recorded yet, ask what the remaining balance will be once it’s applied.

What happens if the crew finds something unexpected during installation?

The example proposal notes that an unusual footing or a foundation wall hidden from view may require additional work. If the crew finds something that changes the scope or price, review the proposed change in writing before approving it.

Can the warranty transfer if I sell my home?

The WaterGuard warranty in the example can transfer if Frontier is notified within 30 days of the real estate transfer. Keep the signed agreement and job drawing together so the next homeowner can see what was installed and where.

Related Posts

What Happens During a Basement Waterproofing Inspection?

What Happens During a Basement Waterproofing Inspection?

A Frontier basement waterproofing inspection includes a walkthrough with your design specialist and a discussion of the recommended repairs. Your...

Read more
Can Driveway Runoff Send Water Into Your Basement?

Can Driveway Runoff Send Water Into Your Basement?

Driveway runoff can contribute to basement leaks when it collects against the foundation and saturates the surrounding soil. The right...

Read more
Why Is My Basement Still Wet If It Already Has a Drainage System?

Why Is My Basement Still Wet If It Already Has a Drainage System?

If your basement still leaks with a drainage system installed, water may be entering outside the protected area, an older...

Read more
Will a Dehumidifier Fix a Basement Leak?

Will a Dehumidifier Fix a Basement Leak?

A dehumidifier removes moisture from basement air, but it will not stop a leak. Drainage collects incoming groundwater, and a...

Read more

our service area

We serve the following areas

TennesseeKentuckyAlabama Our Locations:

Frontier Foundation & Crawl Space Repair
5150 Hwy 41A
Joelton, TN 37080
1-931-451-1133


Frontier Foundation & Crawl Space Repair
600 Boulevard S SW
Suite 104
Huntsville, AL 35802
1-256-387-7772


Frontier Foundation & Crawl Space Repair
911 College St Suite 203
Bowling Green, KY 42101
1-270-770-4456


Frontier Foundation & Crawl Space Repair
118 N Liberty St
Jackson, TN 38301
1-731-747-4699
Service Area
Free Quote