Foundation Repair Before & After Photos

Sagging floors can cause a lot of issues for your home, most common reason is lack of support.

This customer had floors that were sagging and falling, so we installed SmartJacks to raise the foundation and prevent future settling.

This customer in Gilbertsville, KY, had failing crawlspace supports, which were causing cracks in the exterior wall and sagging floors. The wood of the floor joist is beginning to show signs of severe damage due to failing crawlspace supports. As these supports begin to give way, the floors above can sag, and interior walls may crack, resulting in expensive problems in your home. We installed Smart Jacks throughout the crawlspace to provide permanent structural support. 

This customer in Murray, KY had multiple issues. There was concrete sinking and cracking in the garage, walkway, and the stairs to the front porch. There were also foundation settlement issues on the other side of the home. 

For the cracking in the garage, and the sidewalk sinking we installed  PolyLEVEL to lift and stabilize the garage flooring as well as the walkway, then added NexusPro joint sealant around the perimeter of the garage and the walkway to the front porch to seal any cracked areas.  

On the other side of the home where there was a foundation settlement, we installed Helical Piers to lift and stabilize the foundation and StableBrick BowTie wall Stabilization to fix the bowing walls for a permanent solution.    

This customer in Kuttawa, KY had multiple projects completed on his home. We started with adding a tripleSafe Sump Pump in the pantry, where he was having water and moisture issues. On the front of his garage, he had some wall repair needing attention so we added Carbon Armor to part of the garage and the front of the house. CarbonArmor is the ideal, non-invasive solution to permanently stabilize block foundation walls. The CarbonArmor system uses carbon fiber-reinforced polymers that are many times stronger than steel, yet flexible enough to contour to bowing walls.

In his pool house/storage room, he also had some foundation issues causing wall failure so we added Power Brace to the walls. The PowerBrace system permanently stabilizes foundation walls. Zinc-plated steel beams are custom-fit to your basement height and tightly secured against the wall with brackets that are anchored to the basement floor below and first-floor framing above.