Concrete Repair Before & After Photos

This aggregate driveway was cracking and breaking. The soil was washing out underneath and causing quite a bit of damage. Getting this eye sore fixed was important to Amber. It was aggravating to look at and the effects on the homes value was a concern.

Ground settling caused cracks and separation on the customer's front sidewalk and driveway. Our specialist used Polylevel 400 to lift as much as the Structure would allow, guaranteeing stabilization. Polylevel provides the fill, lift and stabilization for the issue. Nexus Pro crack repair and joint sealant were used to complete the project.

These Tennessee homeowners had a very unsightly crack! A piece of their driveway had cracked, sunk and caused an unlevel ground to walk on. It was time they got professional help to fix their problem.

They had used our services before in their previous home, so they knew we provided quality work. They called us again in no time. 
Our inspector came out to their home for their free inspection and knew right away what they needed!

The driveway was in need of our PolyLevel foam injection to lift the sunken slab back to its original position and it also needed our NexusPro Joint Sealant to seal the cracks, so they wouldn't get worse! NexusPro is also resistant to UV rays, which results in no drying, cracking, or bubbling! 

The homeowners now have a great looking driveway!
Call us today for your free estimate! 

The concrete driveway going into the garage, patio and around the pool had cracks due to settling. The repairs for this included Install Poly Level to level concrete and to clean up and prepare cracks as needed and apply Nexus Pro joint sealant. 

This customer had issues with ground settlement and washouts. These things caused voids in the ground under the concrete, thus causing cracking on the sidewalk. Our crew used Polylevel 400 to lift as much as the structure would allow, and stabilization was guaranteed. Once the voids are filled, the cracks are repaired and sealed using Nexus Pro. Once the repairs are done & the excess Polylevel foam has been trimmed, the customer will be responsible for filling the exposed area with dirt or filler to ensure the erosion does not return.