Sump Pumps Before & After Photos

This customer in Martin, TN called us out to out to their home to diagnose pump issues. We determined that ultra sump 3 was not working, dehumidifier was not working and CleanSpace was untucked from water guard. The customer went ahead with replacement of ultra sump 3 to ultra sump 4. We pulled out all pumps and cleaned thoroughly. Reassembled pumps and flood tested each pump, replaced Sedona with a refurbished one, tested Sedona for proper operation, changed battery in water watch alarm, and tucked CleanSpace back into the WaterGuard. We also cleaned up the area and organized loose wires. This customer was happy with results. 

During a service visit to this home we found that water was still entering the crawlspace and after checking all the pipes and finding no leaks the last step is to flood test the access door - this is where the issue was, the door was not closing all the way and subsequently letting water in.

This customer in Mayfield, KY was concerned with flooding in his basement and all the destruction that comes with it. We came out to install a TripleSafe Complete pump system with twin liner, 1/3 HP cast-iron primary AC pump, 1/2 HP cast-iron AC back-up pump, and UltraSump battery back-up pumping system with charging/control box with alarm, and 120 amp sealed maintenance-free battery. Includes 3 CleanPump stands, airtight lid with airtight floor drain, 2 IceGuards, LawnScape Outlet, and WaterWatch alarm system. 

Our sump pump systems include the following features:

• WaterWatch® Alarm: Sounds off to let you know if water has risen past the point where the pumps should have turned on.
• SuperLiner Sump Liner: Large enough to keep your sump pump working properly without turning on and off repeatedly, but not so large that your liner goes too deep, making your sump pump wear out prematurely as it pumps out unnecessary water.
• Airtight Sump Lid: An airtight lid keeps odors and humidity out while protecting your sump from debris from the basement floor. Rubber grommets around all pipes and wires help maintain the airtight lid and also help to keep all PVC pipes steady and quiet.
• CleanPump Stands: These sump pump stands are installed to raise the pumps off of the bottom of the liner. Any silt or sediment that settles on the bottom of your sump pit will be kept away from your pump. These stands also allow for height adjustment of the pump if necessary.

We also offer our IceGuard® anti-freeze device as an additional feature you can add on to your sump pump system:

• IceGuard® Discharge Line Protection: Many sump pump discharge lines are susceptible to freezing during the cold winter months. Our IceGuard® discharge line protection prevents this from happening, with no need for the homeowner to do anything! This specifically designed grated adapter is located outside where the discharge line exits the house. If the pipe underground freezes in the winter, water can still be pumped out without the worry of backups into your basement!

Having an open sump pump does not prevent water vapor from entering the air and acts as a humidifier to the crawlspace. this families home was experiencing water and mold each time there was heavy rains, and needed our help to permanently fix this common crawl space issue. We installed a TripleSage Complete pump system, which includes a secondary pump and battery back up to prevent power outtages from ever causing the system to fail.

As a part of the basement waterproofing project in this Calvert City, KY home, we installed the TripleSafe sump pump system. The TripleSafe intakes water from the drainage tracts that we installed along the perimeter of the basement. The TripleSafe moves water up and out of the home's basement, keeping it dry for years to come.

The homeowner is satisfied with the quality of work that we completed.