Click on a photo to enlarge.
The customer in Clarksville, TN called Frontier when they noticed moisture issues and mold growth in their crawl space. For this project, we cleaned up the debris in the crawl space and then remediated the mold issue. After that to prevent the problem from reoccurring we installed Drainage matting, CleanSpace liner on the floor and walls, a TripleSafe sump pump, a SaniDry Sedona dehumidifier, and a drainage system. We finished the project off with a new EverLast crawl space door.
Before and after a complete crawl space encapsulation in Clarksville, TN.
This customer in Clarksville, TN, had water drainage issues and sagging support beams in the crawl space. To mitigate the problem, we completed a crawl space encapsulation with a SmartJack system to stabilize the structure and keep the moisture out.
This Nashville family has just recently bought their home and had already noticed a moisture problem in their crawlspace. By installing our CleanSpace line and TripleSafe Complete Pump System they now have the confidence that issues such as wood rot, mold and pests won't be a problem for them.
This home was "encapsulated" 5 years ago by another company.
However it was not a true encapsulation, it only had a thin plastic liner rolled out along the dirt floor and partially up the block.
Because this plastic did not control the humidity of this space, and during some seasons make the humidity worse, the family had noticed their floors above were warping.
This faux encapsulation had caused additional problems for the home.
A true encapsulation will completely seal the home from outside air.
Our vapor barrier, CleanSpace, is a 20 mil plastic that covers the earth and runs up the block. Vents are closed and insulated, all joist and any other areas air can flow are sealed with foam.
A non-organic custom insulated crawl space door closes the space off finishing off the encapsulation.
The home's floors are now protected from the heat and moisture that are necessary for warping.
our service area
4.9 
