Crawl Space Repair Photo Album: Crawl Space Repair in Nolensville, TN
Kerry in Nolensville, TN contacted Frontier Foundation & Crawl Space Repair after noticing concerns in his crawl space. During the inspection, our design technician found the relative humidity at 86%. The existing insulation was saturated and falling from the floor joists, and mold growth was visible throughout the space. To protect the home and eliminate the moisture issues, a full crawl space repair plan was recommended.
Our team began by removing all debris and pulling out the damaged insulation. Frontier’s soda-blasting crew then cleaned the floor joists to remove mold and prepare the space for repairs. To restore proper structural support, we installed four 8-ft HSS Supplemental Beams and eight SmartJacks beneath the failing joists.
Next, the crew installed a complete Crawl Space Drainage System paired with a TripleSafe Complete pump system to move water out of the crawl space. The discharge line was routed through an IceGuard® system and LawnScape™ outlet to ensure water is sent away from the foundation, even in freezing conditions. A CleanSpace® 20-mil vapor barrier with CleanSpace® Drainage Matting was then placed across the entire crawl space to keep moisture from entering the home from beneath.
To control humidity long-term, we installed a SaniDry™ Sedona dehumidifier and air filtration system. The crew also sealed both crawl space entrances with new EverLast™ Doors (2.5 ft x 3 ft and 4 ft x 5 ft) and applied RimTite™ Joist Insulation to close off remaining gaps and air leaks.
With these solutions in place, Kerry’s crawl space is now dry, protected, and structurally supported for years to come.
Drainage System
A complete drainage system was installed inside the crawl space.
Soda Blasting
Our team began by removing all debris and pulling out the damaged insulation. Frontier's soda-blasting crew then cleaned the floor joists to remove mold and prepare the space for repairs.
Falling Insulation
Kerry in Nolensville, TN contacted Frontier Foundation & Crawl Space Repair after noticing concerns in his crawl space.
Relative Humidity
During the inspection, our design technician found the relative humidity at 86%
Moldy Floor Joists
The existing insulation was saturated and falling from the floor joists, and mold growth was visible throughout the space.
SaniDry™ Sedona dehumidifier
To control humidity long-term, we installed a SaniDry™ Sedona dehumidifier and air filtration system.
TripleSafe Complete pump system
Next, the crew installed a complete Crawl Space Drainage System paired with a TripleSafe Complete pump system to move water out of the crawl space.
RimTite™ Joist Insulation
The crew applied RimTite™ Joist Insulation to close off remaining gaps and air leaks.
SmartJacks
To restore proper structural support, we installed four 8-ft HSS Supplemental Beams and eight SmartJacks beneath the failing joists.
IceGuard® system and LawnScape™ outlet
The discharge line was routed through an IceGuard® system and LawnScape™ outlet to ensure water is sent away from the foundation, even in freezing conditions.