Crawl Space Repair Photo Album: Crawl Space Repair in Springfield, TN

Margie in Springfield, TN, contacted Frontier to encapsulate her crawl space. During the inspection, the design specialist found wet soil around the perimeter, indicating water intrusion. Relative humidity was also measured at 64%, above the 60% level where mold can begin to grow. To address the moisture, the Frontier crew installed a perimeter drainage system connected to a TripleSafe sump pump, which discharges water through an IceGuard and LawnScape Outlet. Drainage Matting was installed along the floor, followed by a CleanSpace liner to separate the crawl space from the ground and help seal the space. A SaniDry Sedona dehumidifier was then installed to control humidity and help keep the crawl space dry long-term.

Relative Humidity

The relative humidity in the crawl space was 64%, higher than the 60% threshold where mold can grow.

Efflorescence on Crawl Space Wall

A white, chalky substance called efflorescence is an indicator that moisture is entering through the foundation wall.

Wet Ground

Mud around the perimeter of the crawl space indicates moisture intrusion and potential standing water during rainy seasons.

StarPipe Drainage System

A perimeter drainage system is installed to collect water as it enters the crawl space and direct it towards the sump pump.

Drainage Matting Installation

Drainage matting is installed underneath CleanSpace liner to prevent water from becoming trapped underneath.

CleanSpace Encapsulation

CleanSpace liner is adhered to the walls, piers, and ground of the crawl space to inhibit moisture from evaporating into the space and causing mold growth.