
Trench Dug
A trench is dug around the perimeter of the basement to prepare for the installation of the WaterGuard system.

Area Cleaned
All the debris has been cleaned up and taken out of the basement.

Weep Holes are Drilled
Able to waterproof concrete block foundation walls -- Weep holes are drilled at the bottom of the blocks to drain the hollow cavities.

Excavation for the Sump Pump
A larger area is excavated at the lowest point of the basement to accommodate the installation of the sump pump.

Preparing for the WaterGuard
The WaterGuard is ready to be installed.

CleanSpace® Wall System
Like our other wall systems, it can hold back water vapor passing through your foundation walls, directing it to your sump pump. With anti-microbial protection called UltraFresh built right in, no mold or mildew will grow on the CleanSpace!

CleanSpace Vapor Barrier
CleanSpace is added on top of the WaterGuard system for an added layer of protection.

TripleSafe Sump Pump and SaniDry Sedona
A TripleSafe® Sump Pump System (shown here), combined with a SaniDry® dehumidifier, represents the ultimate in basement waterproofing and humidity control.

Cement Added
A thin layer of cement is added on top of the WaterGuard system to keep everything in place and secure the system.

IceGuard
Water escapes from the IceGuard® fitting only when the discharge line becomes clogged. Otherwise, water flows past the slotted openings into the drain pipe.