Click on a photo to enlarge.
This customer in Nashville, TN was having moisture and water issues in his basement. He decided to encapsulate his basement walls with our CleanSpace walls and to control the moisture in the air he added our SaniDry Sedona Dehumidifier with a two-stage filter system. While this is not a complete encapsulation system, every home is different and requires different solutions. This is why we send our Design Specialists out for a free estimate to see what issues you are having and what the best course of action is to mitigate them. This solution will not control water intrusion but will address his current moisture issues. In the future, if he has water intrusion from the walls or outside, he will need to upgrade to a complete basement waterproofing system.
This customer in Nashville, TN has a waterproofing system with us. When you purchase our products, we service them yearly for you. Some of the things we check are as follows: Follow the perimeter drain around the perimeter looking for obvious problems, inspect for debris in the wall drain – vacuum as necessary, lift WaterGuard port covers and inspect inside, check for deflection on exterior walls and look for mold and rot. For the Sump Pumps we check to see that the indicator lights on the charger are normal, test UltraSump by pushing the push-to-test switch, unplug all the pumps from the wall and push the test switch again, as well as check circuit/electrical outlet with a circuit tester. We also test all connecting lines, and anything else that might need attention to make sure your system is running at full capacity and you won't have any issues. This customer's battery was pretty old, so it was replaced, then we cleaned everything and he is good to go until next year. At Frontier Foundations and Crawl Space Repair, you are a valued customer for life!
This customer in Nashville, TN, called Frontier for their basement waterproofing needs. To waterproof their basement, we installed a WaterGuard sub-floor drainage system, CleanSpace Liner, and a TripleSafe sump pump to pump water through the drainage lines. We also installed IceGuard to prevent floods from clogged or frozen discharge lines and a LawnScape system.
No more mold or water puddles in this crawl space!
Vents not only let hot, wet or cold air into a crawl space - but water too!
By having high water content in a crawl space, the relative humidity will cause wood to become damp and rot, causing mold to grow. In winter time when the relative humidity in the air is low, the result is cold floors, cold drafts and high energy bills! So when the solution is worse than the problem, the answer is to use a vent cover in conjunction with our CleanSpace system.
our service area
4.9 
