4.9 
Tripping Hazard
Settlement in the concrete floor caused a tripping hazard near the garage entrance.
Cracked Garage Apron
Sinking concrete caused cracks to form in the slab.
Garage Door Lip
The garage apron had sunk, creating a tripping hazard between the outside of the home and the garage.
Lifting the Garage Crack
The crew worked together to lift a crack near the garage door, eliminating the tripping hazard.
Filling Voids
PolyLevel foam was injected underneath the garage floor to stabilize the floor and prevent further cracking.
Lifting with Jacks
Jacks are used to lift the slab so PolyLevel foam can distribute evenly through the void.
Grinding Cracks
The crew grinds out cracks in the concrete to allow NexusPro to bind effectively to the concrete.
After Lifting
PolyLevel was used to stabilize the concrete apron and reduce the difference in height between the aggregate concrete and the garage floor.
NexusPro Crack Filling
The crew used NexusPro to seal the crack in the garage apron. This seal will prevent water from going in the crack and causing future washout.
Driveway Repair
Before leaving the home, the crew repaired and sealed a crack further down the driveway.